Troubleshooting

Which screws do I use to assemble the frame?
  To assembly the silver/grey frame of your steam shower you must use the longest screws supplied. These are self tapping screws and are best fitted...
Fri, 2 May, 2014 at 3:07 PM
The Whirlpool bath will not start when I press the button.
If your Whirlpool bath has been working, but now will not start, it may simply be that the clear air hose that connect between the underside of the bu...
Fri, 2 May, 2014 at 3:27 PM
My hand shower keeps drooping in the Holster
If your hand shower keeps drooping whilst in the Holster of the riser bar, then you may need to tighten up the screw inside the Holster. Simply ...
Fri, 2 May, 2014 at 3:27 PM
My Steam Generator is not working....
If you are just installing your steam shower and there is no steam being produced: (If you have a Deluxe model your display may indicate an Error message)...
Thu, 16 Oct, 2014 at 5:16 PM
Why do my shower doors not open or run smoothly?
 In order for your doors to open and run smoothly they need to be correctly fitted to ensure they are not too tight in the runners, that they run leve...
Fri, 20 Jun, 2014 at 3:10 PM
Bath tub/base has cracks around the steam pod.
It is VERY IMPORTANT that you check and tighten ALL connections and joins when assembling the shower. If the steam pod is not fully tightened to th...
Fri, 2 May, 2014 at 3:39 PM
There are 3 chrome knobs on the control panel, what do they all do?
Most shower units come with 3 control knobs located on the control panel to operate the ‘water’ functions in the unit. The top control is a divertor val...
Fri, 2 May, 2014 at 3:41 PM